Quantcast
Channel: High Availability (Clustering) forum
Viewing all 4519 articles
Browse latest View live

CSV - System Volume Information Problem

$
0
0

Hi,

Not sure if this is the correct place to ask my question...

We are having an issue with the System Volume Information on one of our Cluster Shared Volumes growing to a large size.
It currently sits at 598GB. 

We have two hosts - Three volumes, C:\ClusterStorage\ - Volume1 - Volume2 and Volume3.

The issue only appears to be happening on Volume2 in the System Volume Information folder and not sure what's causing it.

I have checked Shadow Copies on both hosts and all are disabled.

I am hoping someone could point me in the direction to figure out what is causing the consumption of lots of space.


We run a daily windows backup on each host to separate USB drives also.

Thanks,
Adam




Server drops connection when copying large file

$
0
0
I have 3 Windows 2012 R2 Datacentre servers. These have an iSCSI connection to a netapp SAN. They have the latest network drives and all Windows updates. It seems that as soon as I go to copy a large file, 50GB any drive either the local drive or the cluster shared storage the server drops its LAN connection. The only fix is to then disable the LAN connection and enable it again. what could be causing this? Now as soon as you click paste it drops the connection, I can't ping anything on the local network yet I can ping the SAN on that network.

SQL Failover installation dilemma

$
0
0

Hy folks 

I'm in a dilemma I installed a loadbalacing cluster in  a given domain and then installed a failover cluster on the same servers. Given that installing load balancing will add the same IP to the both nodes automatically to the both network adapters of the both nodes and then when you try to install sql server this won't be passed because the validation report of the failover cluster is not 100% valid  given that duplicate IP will be detected during the validation of the failover cluster how can one tweak this situation


The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Windows 2012 Failover Clusters "An error occurred connecting to the Cluster"

$
0
0

Good Morning

I have 4 Failover clusters.  1 SQL Cluster, 1 HyperV Cluster, 1 IIS Cluster (Not NLB) and 1 File Cluster.  All running windows 2012.  The File cluster is fully upto date and has all the latest Firmware and Drivers installed and a couple off Windows Hotfixes for Windows Clustering.  The Hyper-V and SQL Cluster is scheduled for updates in the couple off weeks but both have been updated within the last couple weeks.  The problem I have on all four cluster is after a period off time, we are no-longer able to connect to the cluster from any node in the cluster.  What I mean is on the SQL Cluster after a period of time (This might be 3-4 weeks), if I connect to any of the nodes in the SQL Cluster and open fail-over cluster manager I am unable to connect to the cluster.  Fail-Over cluster manager first starts with "Connecting to Cluster" "The Operations is taking longer than expected", then after about 2-3 minutes an error comes up saying "The Operations has Failed", "An error occurred connecting to the Cluster '<Cluster-Name'>", If I then click on "See details" I get "An error occurred Trying to Display the cluster information", "One or more errors occurred","Provider load failure".

This same problem happens on all of our windows 2012 Clusters, we do have a 2012 R2 Hyper-V cluster but this is managed by a different team and I don't know if they have the same issue or not.

It seems to be one of the host that is causing the problem, normally the host that has Quorum, and if we reboot that host, which causes the cluster to fail over all the roles to a different node the cluster is then accessible again. Once the node that was rebooted comes back online everything is fine again for a period of time until this problem happens again.

If anyone has any suggest I would be very grate full.

Richard 


ID 2051 FailoverClustering Errors

$
0
0
Good morning, 

I just took a quick look at my Event Viewer on my Windows Server 2012 Standard server hosting Exchange 2013 and see the following errors... every 5 minutes for days now. Im not aware of any updates installed so Im not sure what could be causing this or where to troubleshoot quite honestly; 

The server is running on VMware Virtual Platform.  

Log Name:      Microsoft-Windows-FailoverClustering/Diagnostic
Source:        Microsoft-Windows-FailoverClustering
Date:          6/8/2015 10:55:33 AM
Event ID:      2051
Task Category: None
Level:         Error
Keywords:      
User:          SYSTEM
Computer:      XCH1Server.Domain.local
Description:
[RCM] [GIM] ResType Virtual Machine has no resources, not collecting local utilization info

Now that I look at all my 6 exchange servers running Windows Server 2012 Standard, I see the same in those event logs also. 

Any suggestions folks? 

Add Node to Cluster - Keyset does not exist

$
0
0

Hi,

I am trying to add third node to a Windows 2012 fail over cluster, but gets the following error.

The server 'DR.domain.com' could not be added to the cluster.
An error occurred while adding node 'DR.domain.com' to cluster 'domain-fc'.

Keyset does not exist

The User I am using to Add Node is Domain Admin, so it may not be a permission issue.

All nodes are Windows 2012 R2 VMs on Azure


Usman Shaheen MCTS BizTalk Server http://usmanshaheen.wordpress.com


Waindows server 2012 r2 failover cluster access denied

$
0
0

Dear Experts,

I cant access windows failover cluster 2012 r2. the error shows below

"You do not have administrative privilages on the cluster. contact your network administrator to request access."

Error code: 0x80070005

Access denied.

PS C:\> Get-ClusterAccess
Get-ClusterAccess : You do not have administrative privileges on the cluster. Contact your network administrator to
request access.
    Access is denied
At line:1 char:1
+ Get-ClusterAccess
+ ~~~~~~~~~~~~~~~~~
    + CategoryInfo          : AuthenticationError: (:) [Get-ClusterAccess], ClusterCmdletException
    + FullyQualifiedErrorId : ClusterAccessDenied,Microsoft.FailoverClusters.PowerShell.GetClusterAccessCommand

The current user is enterprise administrator,


MSDTC still offline

$
0
0

Hi


I have sql server 2008 sql clustered hosted on windows server 2008 r2


still showing error 1069


Failed to load restype 'MSMQ': error 21.

HandleMonitorReply: ONLINERESOURCE for 'MSDTC-PMDTC', gen(0) result 5018.
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] TransitionToState(MSDTC-PMDTC) OnlinePending-->ProcessingFailure.
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Pending --> Failed)
000002d8.000002b8::2015/06/05-23:17:06.369 ERR   [RCM] rcm::RcmResource::HandleFailure: (MSDTC-PMDTC)
00000e10.000004c0::2015/06/05-23:17:06.369 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:369 : [ e10. 4c0] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@675): DTC online thread has stopped
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] resource MSDTC-PMDTC: failure count: 1, restartAction: 2.
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] Will restart resource in 500 milliseconds.
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] TransitionToState(MSDTC-PMDTC) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Failed --> Pending)
000002d8.000002b8::2015/06/05-23:17:06.369 INFO  [RCM] TransitionToState(MSDTC-PMDTC) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000e10.00001508::2015/06/05-23:17:06.385 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:385 : [ e10.1508] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcTerminate (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@800): Terminating DTC resource
000002d8.0000100c::2015/06/05-23:17:06.385 INFO  [RCM] HandleMonitorReply: TERMINATERESOURCE for 'MSDTC-PMDTC', gen(1) result 0.
000002d8.0000100c::2015/06/05-23:17:06.385 INFO  [RCM] TransitionToState(MSDTC-PMDTC) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000002d8.00000b04::2015/06/05-23:17:06.900 INFO  [RCM] Delay-restarting MSDTC-PMDTC and any waiting dependents.
000002d8.00000b04::2015/06/05-23:17:06.900 INFO  [RCM] TransitionToState(MSDTC-PMDTC) DelayRestartingResource-->OnlineCallIssued.
00000e10.00001038::2015/06/05-23:17:06.900 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:900 : [ e10.1038] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnline (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@197): Bringing the DTC resource online
000002d8.00000b04::2015/06/05-23:17:06.900 INFO  [RCM] HandleMonitorReply: ONLINERESOURCE for 'MSDTC-PMDTC', gen(1) result 997.
000002d8.00000b04::2015/06/05-23:17:06.900 INFO  [RCM] TransitionToState(MSDTC-PMDTC) OnlineCallIssued-->OnlinePending.
00000e10.00000f28::2015/06/05-23:17:06.900 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:900 : [ e10. f28] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@516): DTC online thread is running
00000e10.00000f28::2015/06/05-23:17:06.900 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:900 : [ e10. f28] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@536): Ensuring single resource...
00000e10.00000f28::2015/06/05-23:17:06.900 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:06:900 : [ e10. f28] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@547): Setting up resource registry...
00000e10.00000f28::2015/06/05-23:17:07.009 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:07:009 : [ e10. f28] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@563): Setting up resource files...
00000e10.00000f28::2015/06/05-23:17:07.009 ERR   [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:07:009 : [ e10. f28] 0x800710dc [TRACE_RESOURCE] [ TRACE_ERROR] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@569): Failed to create resource files
00000e10.00000f28::2015/06/05-23:17:07.009 ERR   [RHS] Online for resource MSDTC-PMDTC failed.
000002d8.0000170c::2015/06/05-23:17:07.009 WARN  [RCM] HandleMonitorReply: ONLINERESOURCE for 'MSDTC-PMDTC', gen(1) result 5018.
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] TransitionToState(MSDTC-PMDTC) OnlinePending-->ProcessingFailure.
00000e10.00000f28::2015/06/05-23:17:07.009 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:07:009 : [ e10. f28] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@675): DTC online thread has stopped
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Pending --> Failed)
000002d8.0000170c::2015/06/05-23:17:07.009 ERR   [RCM] rcm::RcmResource::HandleFailure: (MSDTC-PMDTC)
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] resource MSDTC-PMDTC: failure count: 2, restartAction: 2.
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] TransitionToState(MSDTC-PMDTC) ProcessingFailure-->[WaitingToTerminate to Failed].
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Failed --> Pending)
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] TransitionToState(MSDTC-PMDTC) [WaitingToTerminate to Failed]-->[Terminating to Failed].
00000e10.00001508::2015/06/05-23:17:07.009 INFO  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:07:009 : [ e10.1508] 0x00000000 [TRACE_RESOURCE] [  TRACE_INFO] DtcTerminate (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@800): Terminating DTC resource
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] Resource MSDTC-PMDTC is causing group PMDTC to failover.  Posting worker thread.
000002d8.0000170c::2015/06/05-23:17:07.009 INFO  [RCM] rcm::RcmGroup::Failover: (PMDTC)
000002d8.00001430::2015/06/05-23:17:07.009 INFO  [RCM] HandleMonitorReply: TERMINATERESOURCE for 'MSDTC-PMDTC', gen(2) result 0.
000002d8.00001430::2015/06/05-23:17:07.009 INFO  [RCM] TransitionToState(MSDTC-PMDTC) [Terminating to Failed]-->Failed.
000002d8.00001430::2015/06/05-23:17:07.009 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Pending --> Failed)
000002d8.0000170c::2015/06/05-23:17:07.040 WARN  [RCM] Failing over group PMDTC, failoverCount 1, last time 2015/06/06-02:17:07.040.
000002d8.0000170c::2015/06/05-23:17:07.040 INFO  [RCM] rcm::RcmGroup::Move: (PMDTC, 2)
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] rcm::RcmGroup::Move: Bringing group 'PMDTC' offline first...
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] TransitionToState(DTC) Online-->OfflineCallIssued.
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Failed --> Pending)
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] TransitionToState(PMDTC) Online-->OfflineCallIssued.
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] 'IP Address 10.4.225.223' cannot go offline yet; 'PMDTC' is in state OfflineCallIssued.
000002d8.0000170c::2015/06/05-23:17:07.102 INFO  [RCM] TransitionToState(IP Address 10.4.225.223) Online-->WaitingToGoOffline.
00000828.000007b4::2015/06/05-23:17:07.102 INFO  [RES] Physical Disk <DTC>: Offline request.
00000828.00000f34::2015/06/05-23:17:07.102 INFO  [RES] Physical Disk: DriveLetter mask: 0x200000
00000828.0000112c::2015/06/05-23:17:07.102 INFO  [RES] Network Name <PMDTC>: Taking resource offline...
00000828.00000398::2015/06/05-23:17:07.102 INFO  [RES] Network Name <PMDTC>: TimerQueueTimer rescheduled to fire after 600 secs
00000828.00000398::2015/06/05-23:17:07.102 INFO  [RES] Network Name <PMDTC>: Offline of resource continuing...
000002d8.00000e3c::2015/06/05-23:17:07.102 INFO  [RCM] HandleMonitorReply: OFFLINERESOURCE for 'DTC', gen(0) result 997.
000002d8.00000e3c::2015/06/05-23:17:07.102 INFO  [RCM] TransitionToState(DTC) OfflineCallIssued-->OfflinePending.
000002d8.000002b8::2015/06/05-23:17:07.102 INFO  [RCM] HandleMonitorReply: OFFLINERESOURCE for 'PMDTC', gen(2) result 997.
000002d8.000002b8::2015/06/05-23:17:07.102 INFO  [RCM] TransitionToState(PMDTC) OfflineCallIssued-->OfflinePending.
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: DNS name PMDTC successful removed from LSA
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter Local Area Connection* 9 RFC2863 operational status = 1.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     46BE6EB5-4725-45FF-8FE5-74B59097E912
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Microsoft Failover Cluster Virtual Adapter
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: Local Area Connection* 9
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::1%1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::2%1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::3%1
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter LAN RFC2863 operational status = 1.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     0BC53ED7-5CBE-437B-8C1F-F67E8C5CD420
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #37
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: LAN
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      10.6.125.62
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      10.6.125.61
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter HB RFC2863 operational status = 1.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     1358526B-EE0C-45D4-937B-5F20B361A9BB
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #38
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: HB
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    0
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter isatap.{1358526B-EE0C-45D4-937B-5F20B361A9BB} RFC2863 operational status = 2.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     846D2E37-5A7C-4D66-9EB7-5FD7FC29C3A4
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Microsoft ISATAP Adapter #2
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: isatap.{1358526B-EE0C-45D4-937B-5F20B361A9BB}
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    0
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter isatap.{46BE6EB5-4725-45FF-8FE5-74B59097E912} RFC2863 operational status = 2.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     E8236BA9-0674-43A0-A07B-CA61FD9BE6C4
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Microsoft ISATAP Adapter
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: isatap.{46BE6EB5-4725-45FF-8FE5-74B59097E912}
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    0
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::1%1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::2%1
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      fec0:0:0:ffff::3%1
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter isatap.{0BC53ED7-5CBE-437B-8C1F-F67E8C5CD420} RFC2863 operational status = 2.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     AE997A47-D030-4D0E-92D7-50110E896BC8
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Microsoft ISATAP Adapter #3
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: isatap.{0BC53ED7-5CBE-437B-8C1F-F67E8C5CD420}
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    0
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      10.6.125.62
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DnsServer:      10.6.125.61
00000828.00000398::2015/06/05-23:17:07.181 INFO  [ClNet] Adapter Teredo Tunneling Pseudo-Interface RFC2863 operational status = 2.
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet] Created adapter: DeviceGuid:     CACD9FCB-E362-43CD-A380-12A12AF73665
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DeviceName:     Teredo Tunneling Pseudo-Interface
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  ConnectoidName: Teredo Tunneling Pseudo-Interface
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  Netbios/TCP:    0
00000828.00000398::2015/06/05-23:17:07.181 DBG   [ClNet]                  DNS Suffix:
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: adapter LAN (2)
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: FQDN name PMDTC.moka.com.kw removal with LSA was successful
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: Deleted server name PMDTC from all transports.
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: Deleted workstation name PMDTC from transport 0.
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RHS] Resource PMDTC has come offline. RHS is about to report resource status to RCM.
000002d8.00000638::2015/06/05-23:17:07.181 INFO  [RCM] HandleMonitorReply: OFFLINERESOURCE for 'PMDTC', gen(2) result 0.
00000828.00000398::2015/06/05-23:17:07.181 INFO  [RES] Network Name <PMDTC>: Resource is now offline
000002d8.00000638::2015/06/05-23:17:07.181 INFO  [RCM] TransitionToState(PMDTC) OfflinePending-->OfflineSavingCheckpoints.
000002d8.00000f68::2015/06/05-23:17:07.181 INFO  [RCM] TransitionToState(PMDTC) OfflineSavingCheckpoints-->Offline.
000002d8.00001250::2015/06/05-23:17:07.181 INFO  [RCM] TransitionToState(IP Address 10.4.225.223) WaitingToGoOffline-->OfflineCallIssued.
00000828.0000112c::2015/06/05-23:17:07.181 INFO  [RES] IP Address <IP Address 10.4.225.223>: Taking resource offline...
00000828.0000112c::2015/06/05-23:17:07.181 INFO  [RES] IP Address <IP Address 10.4.225.223>: Deleting IP interface DFE1040A.
000002d8.000002b8::2015/06/05-23:17:07.181 DBG   [NETFTAPI] received NsiDeleteInstance  for 10.4.225.223
000002d8.000002b8::2015/06/05-23:17:07.181 WARN  [NETFTAPI] Failed to query parameters for 10.4.225.223 (status 80070490)
000002d8.000002b8::2015/06/05-23:17:07.181 DBG   [NETFTAPI] Signaled NetftLocalRemove  event for 10.4.225.223
00000828.0000112c::2015/06/05-23:17:07.196 INFO  [RES] IP Address <IP Address 10.4.225.223>: Address 10.4.225.223 on adapter Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #37 offline.
000002d8.00001430::2015/06/05-23:17:07.196 INFO  [RCM] HandleMonitorReply: OFFLINERESOURCE for 'IP Address 10.4.225.223', gen(0) result 0.
000002d8.00001430::2015/06/05-23:17:07.196 INFO  [RCM] TransitionToState(IP Address 10.4.225.223) OfflineCallIssued-->OfflineSavingCheckpoints.
000002d8.00001430::2015/06/05-23:17:07.196 INFO  [RCM] TransitionToState(IP Address 10.4.225.223) OfflineSavingCheckpoints-->Offline.
00000828.00000f34::2015/06/05-23:17:07.321 INFO  [RES] Physical Disk: HardDiskpScopeShareCallback: Enter resourceName PMDTC
00000828.00000f34::2015/06/05-23:17:07.321 ERR   [RES] Physical Disk: Resource PMDTC is not in online or pending state.
00000828.00000f34::2015/06/05-23:17:07.321 INFO  [RES] Physical Disk <DTC>: HardDiskpCloseSVIHandles: Exit
00000828.00000f34::2015/06/05-23:17:08.350 INFO  [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 1 (sig 486f61a2)
00000828.00000f34::2015/06/05-23:17:08.350 INFO  [RHS] Resource DTC has come offline. RHS is about to report resource status to RCM.
000002d8.00001430::2015/06/05-23:17:08.350 INFO  [RCM] HandleMonitorReply: OFFLINERESOURCE for 'DTC', gen(0) result 0.
000002d8.00001430::2015/06/05-23:17:08.350 INFO  [RCM] TransitionToState(DTC) OfflinePending-->OfflineSavingCheckpoints.
000002d8.00001430::2015/06/05-23:17:08.350 INFO  [RCM] TransitionToState(DTC) OfflineSavingCheckpoints-->Offline.
000002d8.00001430::2015/06/05-23:17:08.350 INFO  [RCM] rcm::RcmGroup::UpdateStateIfChanged: (PMDTC, Pending --> Failed)
000002d8.00000638::2015/06/05-23:17:08.350 INFO  [RCM] rcm::RcmGum::GroupMoveOperation(PMDTC,2)
000002d8.00001430::2015/06/05-23:17:08.366 WARN  [RCM] rcm::RcmApi::ResourceControl: retrying: PMDTC, 5908.


MCP MCSA MCSE MCT MCTS CCNA


Dynamic Quorum - node votes not being dynamically removed

$
0
0

I'm posting this here as I think this is more of a clustering question than Exchange issue.

Setup:

ServerA - 2012R2 with Exchange 2013 DAG Primary Active Mounted

ServerB - 2012R2 with Exchange 2013 DAG Passive Healthy

ServerC - 2012R2 File Share Witness

Name  DynamicWeight NodeWeight Id State
----  ------------- ---------- -- -----
ServerA              1          1 1     Up
ServerB              1          1 2     Up

If I shutdown ServerB gracefully (not running any of the Exchange maintenance scripts), the vote is never removed from ServerB. In cluster manager the votes never downgrade to zero, node goes offline but votes are not dynamically removed as I am expecting.

With Dynamic Quorum, I am expecting that if I shutdown ServerB gracefully it should remove its vote, secondly if I shutdown the fileshare witness, ServerA should not lose quorum and continue up.

Can someone let me know if I am missing something here, or if there is a specific process/command I have to issue when I shutdown ServerB, to cause it or make sure it looses it vote?

Thanks

Jason

Live migration of 'Virtual Machine ADVM-01 ' failed. Event ID : 21502

$
0
0

I've HA Cluster running on Windows 2012 R2 with configured fail over cluster. it's running Windows 2008 , 2008 R2 , 2012 VMs.

already installed the Integration Services. when i tried to Live Migrate to other Node , it's getting failed.

in the event viewer below error message shows.

" Live migration of 'Virtual Machine ADVM-01' failed.

Virtual machine migration operation for 'ADVM-01' failed at migration source 'NODE01'. (Virtual machine ID D840382C-194B-4B4F-8BF5-19552537D0EF)

'ADVM-01' failed to delete configuration: The request is not supported. (0x80070032). (Virtual machine ID D840382C-194B-4B4F-8BF5-19552537D0EF) "

please advise me.


Regards, COMDINI

Differentiate CNO - VCO from computer objects in AD.

$
0
0

In my attempts to distinguish between computers & VCO / CNO, the only solution I’ve is to check the [editable] description field.

another option to check the servicePrincipalName/s is there but that's again editable. In an unguarded environment any one with Admin Rights can change it. Further there's this OperatingSystem which is populated only for boxes & not for VCO/CNO.

  If any one of you can help me find a PSH / filter to do this in a proper way.

yup

Removing Unused Network (Clustered Network Cards)

$
0
0

Good afternoon folks, 

I am trying to remove two old clustered network interfaces from Failover Cluster Manager, so they can be used for other purposes.

The connections are both set to not use cluster network communications. These are interfaces that were previously connected to an OLD storage device on it's own SAN, however we now need the ports to be used as individual management interfaces for the physical servers.

Can anyone advise on this?

Regards
Neil Cotton

Quorum Failover Cluster - Windows Server 2008 r2

$
0
0

Hello,

I have a fileserver cluster environment with two members, NODEA and NODEB. The cluster name is FS01.

We have the quorum disk in the cluster that is active on owner node. 

My question is, when we perform the failover of cluster resources for NODEB, the quorum disk must migrate to NODEB too? If the quorum disk is not migrated instantly, that means we have a problem in the cluster?

Another question is, my cluster is making failover of resources with a certain frequency, it is possible to detect the cause? it is possible to increase the cluster threeshould?

Thank you

Remove node from cluster. It wont leave the cluster!

$
0
0

Had a cluster once...
If I open FCM I dont see any cluster.
Cant get rid of the Cluster membership!

PS C:\Users\administrator.LAB> Remove-ClusterNode hyperv1 -force
Remove-ClusterNode : The remote server has been paused or is in the process of being started.
    The remote server has been paused or is in the process of being started

I have stopped, restarted the cluster service, and still not able to get it out from the cluster.

Anyone who have any solution?

MSDTC fail to be online

$
0
0

Hi

I have windows server 2008 r2 with sql cluster with MSDTC but Msdtc offline and cannot be online ,

TRACE_INFO] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@563):Setting up resource files...

00000e10.00000f28::2015/06/05-23:17:07.009 ERR  [RES] Distributed Transaction Coordinator <MSDTC-PMDTC>: 06-06-2015 02:17:07:009 : [ e10. f28] 0x800710dc [TRACE_RESOURCE] [ TRACE_ERROR] DtcOnlineThread (d:\w7rtm\com\complus\dtc\shared\mtxclu\src\dtcresource.cpp@569): Failed to create resource files

00000e10.00001508::2015/06/05-23:17:58.845 ERR  [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'

000002d8.0000103c::2015/06/05-23:17:58.845 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.

please need help


MCP MCSA MCSE MCT MCTS CCNA



DTCProxy is not running: java.net.ConnectException: Connection timed out

$
0
0

Hi All,

While starting the jboss server we are facing below issue on MSDTC. The DB used is SQL Server 2008 r2. This is a clustered DB environment and MSDTC is working fine on non-clustered environments.

2015-06-09 23:48:18,444 ERROR [STDERR] (main) javax.transaction.xa.XAException: DTCProxy is not running: java.net.ConnectException: Connection timed out

2015-06-09 23:48:18,445 ERROR [STDERR] (main) at com.inet.tds.b.a(Unknown Source)

2015-06-09 23:48:18,445 ERROR [STDERR] (main) at com.inet.tds.b.start(Unknown Source)

2015-06-09 23:48:18,445 ERROR [STDERR] (main) at com.inet.tds.e.start(Unknown Source)

2015-06-09 23:48:18,445 ERROR [STDERR] (main) at org.jboss.resource.adapter.jdbc.xa.XAManagedConnection.start(XAManagedConnection.java:213)

Please help.

(resource type '', DLL 'vmclusres.dll') either crashed or deadlocked.

$
0
0

Hi

For the past few weeks we have been experiencing a strange issue with our failover cluster.

We currently have the following:

7 Nodes : Windows HyperV 2008 R2 Core Servers

SAM driven with 2 controllers, each have 2 network connections to each host.


We seem to be having an issue where random servers within the nodes are rebooting. This can happen at any time during the day, sometimes more than once a day and can easily be more than 1 host at a time or throughout the day. The actual nodes themselves do not restart and appear to be running fine with no connection loss. The servers within the nodes reboot but do not failover to another server.

When looking through the event logs on the failover cluster manager I see this happens everytime: 

Event ID: 1230
Cluster resource 'SCVMM RGVSVR031-T' (resource type '', DLL 'vmclusres.dll') either crashed or deadlocked. The Resource Hosting Subsystem (RHS) process will now attempt to terminate, and the resource will be marked to run in a separate monitor.

Event ID: 1146
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor.

I have looked through logs on the machines that have caused the deadlock but nothing is apparent. Its never a set time or day its completely random. The servers do come back online but its a pain taking out our systems for at least 15 minutes.
Its not always the same server as its completely random but multiple servers have been logged more than once. 

Really stuck what to do next or have any idea whats causing this? All nodes are fully patched with the latest server pack 1.

Windows 2012 R2 Cluster stays up after two of three Voters in Quorum fails

$
0
0

We have a five node windows 2012r2 stretched cluster, running SQL. Three nodes are on our production site and two nodes are on our DR site. We have multiple SQL instances running in production, we have SQL replication running over to our DR site, which is running multiple SQL instances too.

We have configured our three production nodes with quorum votes, the DR site does not have any votes.

So we have three quorum voters at our production site, the two DR nodes have no votes.

If two of the Quorum voters fail, we would expect the cluster to fail, as the votes left (i.e. 1) is less than half.

We have not configured any disk witness.

In a full DR scenario, we are planning to manually configure a disk witness and assign votes to the DR nodes.

We are puzzled why our cluster continues to function, when two of our three quorum voters are down. i.e. two of our production nodes go down, the third one continues to function.

The cluster validation report states "The quorum will be able to sustain failure of two nodes", I am reading "the quorum" being the nodes with votes, if this is the case, then the validation report is telling us, correctly, how the production nodes behave, when two go down, but we are still puzzled with this behavior.

Can anyone explain how the cluster stays up when two of three voters go down?

Some VM start unexpected rebooting on one node (Hyper-V cluster 2012R2)

$
0
0

Hi,

Hyper-V cluster environment:

JBOD->2* storage spaces server 2012 R2->…network share-> Hyper-V cluster 2012R2

Some VM start unexpected rebooting on one node. In last 2 days 3 times.

In event log I found events:

Inside VM last event before crash: 2015-06-11 10:13:58
The system failed to register pointer (PTR) resource records (RRs) for network adapter
with settings: …..

Hyper-V host 2015-06-11 10:15:53
<my_vm> has encountered a fatal error.  The guest operating system reported that it failed with the following error codes: ErrorCode0: 0x7A, ErrorCode1: 0x7CC960, ErrorCode2: 0xC00000C0, ErrorCode3: 0x332D4880, ErrorCode4: 0xF992C850.  If the problem persists, contact Product Support for the guest operating system.  (Virtual machine ID ……)

Hyper-V host 2015-06-11 10:15:54
[RHS] Resource SCVMM <my_vm> IsAlive has indicated failure.

Hyper-V host 2015-06-11 10:15:54
Cluster resource 'SCVMM <my_vm>' of type 'Virtual Machine' in clustered role 'SCVMM <my_vm> Resources' failed.

After reboot VM started in other node.

Where I have to look for cause of problem?

Thanks

Question about DAG and half hour network outage

$
0
0
We have a 6 member DAG in exchange 2010 sp3 ru9 and one hub witness server. We are planning a 30 minute complete network outage. What would be the best course of action to prevent split brain issue and dismounting database confusion in the DAG. We discussed failing over active databases to 3 servers and stopping the exchange services on the other 3 prior to the outage. Would this help or would we also have to stop services on witness server?
Viewing all 4519 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>