Creating Clustered Storage Space out of iSCSI Virtual Disks based on the...
Hi,I have 3 Windows Servers 2012 R2 in a test lab: 172.16.0.64, 172.16.0.65 and 172.16.0.105.The configuration I need to implement is provided on the Figure:...
View ArticleUnknown Issue with 2012 Failover Cluster
HelloI have 2 Hosts , HP Proliant DL580 G7 with Server windows server 2012 Installed and updated with the last windows updates and drivers and hardware firmware. And the Hyper-v Role installed.With FC...
View ArticleError: The computer is joined to cluster when creating the Cluster
Hello Guys, I have created a cluster to configure Hyper-V for 2 Nods, everything was greate and works perfectly, next day the storage hang and the cluster didn't work any more, I have destroyed the...
View ArticleCSV in redirected access on one node...
Hi,We have 3 node cluster and 3 CSV. Now I am able to move the CSV to other 2 nodes and they are coming online without any problem. On 1 specific node all the CSV's will always come online in redirect...
View Articlenetwork and storage configuration for Windows 2012 nodes
I am tasked with setting two cluster windows 2012 using a SAN. I am pretty new to windows clustering since I am predominently a oracle/linux DBA.I would like to know the following :1. IP address...
View ArticleActive Directory used for Windows 2008 R2 cluster is crashed. Reinstalled the...
Hi,I have setup up a two node Windows 2008 R2 cluster (Say, 'Node 1' and 'Node 2') . The AD/DomainCntroller machine (Say , 'AD 1') used for this setup was suddenly crashed. To bring up the 'AD 1'...
View ArticleAdding a 2008R2 to 2008 Cluster
So my plan to migrate off my old hardware is to add new servers to my cluster, move the nodes, and bam, I'm done.But I find that my old cluster is not R2 yet. The pretest spit out a ton of patch...
View ArticleCluster node shows as offline (Red Color) even though cluster service is...
Dear Experts,Recently we have built a Windows Server 2008 R2 two node failover cluster on top of VMware virtual machines by using raw device mapping (quorum disk and shared disk).Cluster has been...
View ArticleWindows Failover Cluster - Different IP
Good Morning! I need to create a WFC (Windows Failover Cluster) in my environment, because i will delivery to my client a AlwaysOn , But the problem begins when i need to assign a IP to the WFC…. I...
View ArticleClik here to view.
Windows Server 2012 Cluster (SQL 2012) Continuous Error Events 2050, 2051
I have deployed Server 2012 Cluster (CSV) for SQL Server 2012. Everythings working fine but some warning and error events generating continuously. NODE01 2050 Warning...
View ArticleNLB IIS, Only Single Server is Active, the other node will not respone untill...
Good dayThis is the Case:2x Server (Server1 - Server 2) using Windows 2008 R2 SP1 with the following detailsEach Server using single Network interface, Unicast , Port Rule 80 SingleBoth server hosting...
View ArticleNo disks suitable for cluster disks were found.
I have setup a windows 2012 cluster between 2 virtual machines (hyperv)I don't have any SAN.When I click on Add Disk, I get an error"No disks suitable for cluster disks were found. For diagnostic...
View ArticleHow to force a quorum?
I have a two node cluster.I am planning to skip any witness. So I will not use either a Disk or FileShare as a witness.So if one node is lost, the cluster would become unavailable. OK, if that happens...
View ArticleClik here to view.
How to define the fail-over order in a windows 2012 cluster
If I am setting up a 3 node Windows 2012 Cluster. (for SQL Always on availability groups). Here Node 1 and Nod2 are in 2 data centers in the same country.Node 3 is in a different country.I want to...
View ArticleUnable to create a clustered VM using Remote Server Administration Tools -...
HiI am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.I have installed Failover Clustering feature on these two Hyper-V servers and...
View ArticleHyper-V 2012 ADMIN$ share on Cluster IP address
Hi, We have a new 2012 cluster with 2 nodes. We're trying to get a backup solution (Asigra) working to back up the cluster but it requires that the ADMIN$ share on the cluster IP address is reachable...
View Articlehyper-v cluster using smb 3.0 shared storage
I have 3 machines I wish to use as hyper-v failover cluster. I wish to use shared storage as SMB 3.0 on a 4th machine. I can create the failover cluster, however when I go to storage to add the SMB...
View ArticleAnalysis Services doesn't fail over - event ids 1069, 1042
Cluster Resource 'Analysis Services' in clustered service or application 'SQL Server (MSSQLSERVER)' failed. Generic Service 'Analysis Services' failed with error '0'. Please examine the application...
View Articleto manage failover cluster,you must be logged in with a domain user account.
to manage failover cluster,you must be logged in with a domain user account. hi everyone, this is the messege i received after installing failover cluster on our Servers and try to config the cluster...
View ArticleNot able to create cluster between two servers
Hi all, pardon me in case I am posting the question in wrong thread. I am creating a cluster between two windows server 2008 R2 for asp.net application running on IIS through network load...
View Article