Clik here to view.
Bug or am I missing something? Server 2012 Cluster Aware Updating task is...
Using the wizard, I specify...Then I look at the scheduled task and it's always one hour off.This isn't a timezone issue because I'm setting it and looking at it on the same server and all our servers...
View ArticleFile Share Witness on a NAS Drive
Hi, i have 2 sets of Always On Clusters (2 nodes in each) 1 set is 2008R2 and the other 2012. I need to configure a File Share Witness on both clusters that reside on a NAS Drive. After configuring...
View ArticleAdding a 10Gb/e interface to a failover cluster
I have a Failover Cluster created with 2 nodes. Currently there are 5 networks available (Cluster Network 1 (2x1Gb/s teamed), iSCSI 1, iSCSI 2, Live Migration, and CSV) showing up. They are running...
View ArticleQuestion about Clustering / Load Balacing
Greetings, I was asking myself something regarding Hyper-V Clustering. I want to setup a cluster working in Load Balancing mode (both Hypervisors turned on) instead of Failover mode. I also want to be...
View ArticleCluster windows 2012 R2 fails over only quorum disk
Hello everyoneI'm working on my SQL certification and I'm trying to setup Cluster on windows 2012 R2 Here is my setup1. File sever (iscsi target server with 3 disk, quorum, data and log disks) 2. SQL1...
View ArticleCluster volume showing full as full when it is not
Dear Team,Our company have Hyper view cluster, One of volume is showing not free spaceI checked that volume stored on one VMI loged and checked that VM Drives(C and D),That s Have free space Why is...
View ArticleCluster Hostname Registers in Place of Existing Host DNS Record
I have a six node cluster named HVCL01 with an IP address of 192.168.0.149. Whatever the current host server is for the cluster has a name record with the same IP address. So, if the current host...
View Articlewindows 2012 r2 CSV report enter pause c0130021
Hi,i use windows 2012 r2 cluster 2 nodes fully patched with ibm storage v3700 FC connect and for the backup i use veeam backup and replication.i get this error few times a day.i must say that the VM's...
View Article2012R2 Cluster "Protected Network" not working / no failover
hi,I have two 2012R2 hosts running in a cluster. Hardware is exactly the same. I created a Virtual Network on both Hyper-V managers. Live migration is correctly working.However i was testing one of the...
View ArticleClik here to view.
Keep Storage Pool "off the cluster"?
Hello,I'm running a hypervcluster with 2 nodes and 3 external NAS for ISCSI-Storage. Each node itself has a couple of Disks, which I want to "dedicate" to backups of the vms. (So each node will make...
View ArticleA write to Shared VHDX prompts addtional I/O IRP'sapart from the CSV volume...
I have a HyperV Failover Cluster with 2 nodes having a shared CSV Volume . When the co ordinator node for the disc changes ,In that co-ordinator node , an NTFS volume gets mounted . I am building a...
View ArticleNetwork Load Balancing is not load balancing applications
In Our environment, we have NLB clusters which has been configured in Unicast mode.NLB is not load balancing the applications and port rule also set as 0 to 65535, also single affinity has been...
View ArticleStrange behavior removing LUN from Cluster Manager
Good morning,I'm wondering if anybody has experience the below behavior, and how they managed to avoid it happening.We had several LUNS on one SQL Failover cluster instance and wanted to remove a...
View ArticleThe Resource or one of its providers has locked status.
HiI have 4 vms in powered off state and unable to power it on in SCVMM / Hyper V 2012 R2. I saw some articles on Hyper V forums and try powering on it via Hyper V failover cluster. I got this error...
View ArticleDell 2950 and Dell MD3000 Cluster problem
hi everyonei'm trying with MD3000 San with 15 disk to build cluster at windows 2003 server 64Bitbut one of server can't initialize disks always get error second server can mount drives easy and working...
View ArticleA CAU Problem
helloraise a problem about CAU. Below is details:enviroment : windows 2012 cluster. 3 Nodes( HV01, HV02,HV03)analyze the cluster updating readiness on one node(HV01). get an error:title: windows...
View ArticleCAU set up for self updating, but it doesn't execute
Hi All, I've setup CAU self updating on several clusters in my environment and for the most part it works great. I have one cluster though that I have enabled self updating on, but it refuses to...
View ArticleHow to configure Cluster Aware Updating to WSUS Server
hellogreetings!!Homer here again. Today, i want to seeking some tech support on CAU configuration.i have completed mostly CAU configuration on my windows 2012 cluster and passed the readiness test....
View ArticleStuck with Redirected Access?
I'm running a HyperV Cluster on 2012 R2. Each node is connected to the "network" with 2 nics (LACP) and to the ISCSINetwork with 4 nics, using MPIO. (usually) For one node, the 4-nic-card just died,...
View Article