dears,
i need your help and advise with the below:
Please find below the scenario:
A new 2 nodes s2d will be created in order to host virtual machines that will be migrated from a standalone hyperv to this newly created cluster.
The standalone hyper-v has three different virtual switches:
- One for the LAN network communication
- One for the CCTV
- One for the DMZ
The new s2d cluster has on each nodes 2 nics who will be teamed using the set switch command.
The output will result to have one set switch.
I will create for the set switch three network adapters ( one for the cctv, one for the dmz, one for the smb/hb)
I will assign the LAN ip on the set switch itself.
Will migrate the vms from the standalone to the new s2d.
Vms already connected to the LAN will be assigned the set switch ( vswitch) created.
The question how to assign the other net adapters( cctv, dmz) to the virtual machines migrated which were connected to cctv/dmz hyperv vswitch on the standalone hyperv( because if we go the settings of the vm, we can just see the set switch created and not the adapters)
please guys your help is appreciated as im gonna deploy the project soon and i the network part is giving me a headache as i cannot test it in lab
best regards,