I have a 2 node cluster and need to see if I set it up correctly:
server 2012
---------------------------------------------------
server1 nic1 IP 10.10.1.10 10gb public
server1 nic2 IP 10.10.1.20 10gb public
server1 IP 10.10.1.30 10gb ISCSI to storage no gateway
server1 IP 10.10.1.40 10gb ISCSI to storage no gateway
server1 IP 192.168.1.1 1gb heartbeat
-----------------------------------------------------
server2 nic1 IP 10.10.1.11 10gb public
server2 nic2 IP 10.10.1.21 10gb public
server2 IP 10.10.1.31 10gb ISCSI to storage no gateway
server2 IP 10.10.1.41 10gb ISCSI to storage no gateway
server2 IP 192.168.1.2 1gb heartbeat
-------------------------------------------------------
cluster IP 10.10.10.110
-------------------------------------------------------
fileserver IP 10.10.10.120
---------------------------------------------------
when I look at the cluster networks I get cluster network 1 (nic2 IP 10.10.1.21 ,nic2 IP 10.10.1.20 ) and for cluster network2 (192.168.1.2 1gb heartbeat,192.168.1.1 1gb heartbeat) ? this does not look right to me,I don't think I should see the heartbeat as cluster2 network in the failover cluster manager, yes everything is on the same vlan. does this look correct? any help would be appreciated.
yes my netmasks are 255.255.255.0
we are limited on our 10gb connections so we just put everything on the one vlan, these are all physical blade servers, not running any hyperv here.